After the days or weeks running, the vacuum fryer should be cleaned well to remove the Excess fat or impurities in the oil pipes, vacuum pipes.
There are 2 main methods for cleaning the vacuum fryer.
1, Manually
This need you feed water into the vacuum fryer and then start heating, when the water temperature up to 80-90 Celsius, turn on the oil pump to circulate the water, so the hot water will circulate in the fryer,oil pump, exchanger,to remove the oil/fat or sugar which stick on the pipes and exchanger. If you want to clean it well, you can add detergent or baking soda in the water, and then start the oil pump running 10-20minutes. Then drain out the 0010010 nbsp;detergent or baking soda water. Finally, use clean water and heated up, circulate again 10-20 minutes,and discharge. 0010010 nbsp;
But the problem is that you can not clean the vacuum pipes because of the water can not pump to vacuum pipes.
2, Automatically 0010010 nbsp;
We can supply CIP system for cleaning the vacuum fryer.
CIP cleaning also referred to as Clean-In-Place cleaning, is a procedure of cleaning interior product contact surfaces such as process pipes, vessels and equipment, without disassembly. Typical food and beverage applications cleaned using an automated CIP system are product transfer lines, processing tanks, homogenizers, mixers, blenders and fillers.
By this CIP system, all the pipes can be cleaned well. There is water sprayers in the vacuum fryer pipes and chamber, it will spray the detergent and clean water with high pressure.
If you like this automatic device, you can inform us before you place the order, we can design it according to your workshop space.
